DMZ Static NAT

From Wiki of WFilter NG Firewall
(Difference between revisions)
Jump to: navigation, search
(Port Forwarding)
(Static NAT)
 
(2 intermediate revisions by one user not shown)
Line 18: Line 18:
 
** Target Port: "redirected to" port, leave it blank for same as the source port.
 
** Target Port: "redirected to" port, leave it blank for same as the source port.
 
** NAT Reflection: enable or disable NAT reflection.
 
** NAT Reflection: enable or disable NAT reflection.
 +
** Forward to VPN: When enabled, you can forward traffic to clients behind a VPN tunnel. Source IP will be translated to LAN ip address, which can be routed back via a VPN tunnel.
  
 
= DMZ =
 
= DMZ =
  
 
* DMZ: port forwarding on all ports.
 
* DMZ: port forwarding on all ports.
 +
 
[[File:dmz01.png|800px]]
 
[[File:dmz01.png|800px]]
  
 
= Static NAT =
 
= Static NAT =
  
You need to define "Local IP" and choose a public IP.  
+
* On "WAN" zone, this rule can translate local traffic to a WAN ip address.
 +
* On "LAN" zone, this rule can translate internet traffic to a LAN ip address.
  
 
[[File:nat01.png|900px]]
 
[[File:nat01.png|900px]]
** Single: a single IP(192.168.10.100) or subnet(192.168.10.0/24).
+
 
** Range: an IP range.  
+
* Single: a single IP(192.168.10.100) or subnet(192.168.10.0/24).
 +
* Range: an IP range.  
  
 
[[Category:Firewall]]
 
[[Category:Firewall]]

Latest revision as of 16:00, 6 May 2022


Contents

[edit] 1 Introduction

"Port Forwarding", "DMZ" and "Static NAT" are all redirecting firewall rules.

  • "Port Forwarding" : forword packets on certain port(s).
  • "DMZ" equals "port forwarding on all ports". Visits to WAN interfaces will be redirected to the DMZ host(except of the excepted ports).
  • "Static NAT" provides one-to-one NAT for local hosts.

[edit] 2 Port Forwarding

Port forward01.png

  • Forwarding: map a WAN port, port range or all traffic to a local host.
    • Type: if type is "all", "source port" and "target port" shall be blank.
    • WAN: target WAN IP address.
    • Source Port: target port to the WAN interface.
    • Target IP: "redirected to" local host IP.
    • Target Port: "redirected to" port, leave it blank for same as the source port.
    • NAT Reflection: enable or disable NAT reflection.
    • Forward to VPN: When enabled, you can forward traffic to clients behind a VPN tunnel. Source IP will be translated to LAN ip address, which can be routed back via a VPN tunnel.

[edit] 3 DMZ

  • DMZ: port forwarding on all ports.

Dmz01.png

[edit] 4 Static NAT

  • On "WAN" zone, this rule can translate local traffic to a WAN ip address.
  • On "LAN" zone, this rule can translate internet traffic to a LAN ip address.

Nat01.png

  • Single: a single IP(192.168.10.100) or subnet(192.168.10.0/24).
  • Range: an IP range.
Personal tools
Namespaces

Variants
Actions
Navigation
Tools