VLAN

From Wiki of WFilter NG Firewall
Revision as of 22:23, 21 June 2017 by WFilter (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search


1 Introduction

"VLAN module" can add "802.1Q VLAN" support for LAN interfaces of WFilter NGF. Usually, you can add VLANs by below two solutions:

  • Add LAN interfaces in "Interfaces" of WFilterNGF, and assign different subnets to LAN interfaces. This is a simplest solution(similar to port-based VLAN).
  • Setup VLAN in your core three-layer switch.
    • Core switch is connected to WFilterNGF via an "access port". With this connection type, you don't need to configure VLAN in WFilterNGF.
    • Core switch is connected to WFilterNGF via a "trunk port". With this type, you need to create VLANs in the WFilterNGF "VLan" for the target VLANs to access internet.

2 Settings

You can add multiple VLANs in each LAN interfaces.

Vlan01.png


Vlan02.png

Personal tools
Namespaces

Variants
Actions
Navigation
Tools