Getting Started with WFilter ROS
From Wiki of WFilter NG Firewall
(Difference between revisions)
(→Configuration Wizard) |
(→Deployment and WAN interfaces) |
||
Line 26: | Line 26: | ||
[[File:ros_guide_gateway.png|600px]] | [[File:ros_guide_gateway.png|600px]] | ||
− | * Bridge: Build a network bridge on interface eth0 and eth1. With bridge deployment, you can transparently deploy WFilter, without changing current network topology. | + | * Bridge: Build a network bridge on interface eth0 and interface eth1. With bridge deployment, you can transparently deploy WFilter, without changing current network topology. Some features will be disabled in bridge mode, including: |
** Firewall, Forwarding | ** Firewall, Forwarding | ||
** IP-MAC Binding | ** IP-MAC Binding | ||
** VPN | ** VPN | ||
− | ** Other features are same as in gateway mode, including access policy, bandwidth shaper, internet usage monitoring and reports... | + | ** Other features are the same as in gateway mode, including access policy, bandwidth shaper, internet usage monitoring and reports... |
** Network diagram of bridge mode: | ** Network diagram of bridge mode: | ||
Revision as of 14:11, 22 December 2015
Contents |
1 Access the Web UI
Most configurations are done via WFilter ROS web UI. The console UI is mainly for failure recovery.
- URL of Web UI: http://192.168.10.1
- Default username is "admin", password is "123456".
- To access Web UI, the client pc shall be connected to the LAN interface of ROS, either directly or via a switch. The client pc shall be configured as "obtain ip address automatically" or static ip "192.168.10.x".
- If you're not sure of the LAN interface, please type "1" in the console menu for details.
2 Configuration Wizard
The Wizard will be launched on first time logon.
2.1 Timezone and Charset
- The first step is to choose "Timezone" and "Charset".
- The "Charset" setting is for WFilter to decode internet usage records, incorrect charset setting will lead to garbled characters. For example, in thailand, you need to choose "Thai" as the language.
2.2 Deployment and WAN interfaces
The WFilter ROS can act as a "gateway" or "network bridge".
- Gateway: WFilter ROS acts as the gateway for local nework. Usually, your current gateway shall be replaced with WFilter ROS. Network diagram:
- Bridge: Build a network bridge on interface eth0 and interface eth1. With bridge deployment, you can transparently deploy WFilter, without changing current network topology. Some features will be disabled in bridge mode, including:
- Firewall, Forwarding
- IP-MAC Binding
- VPN
- Other features are the same as in gateway mode, including access policy, bandwidth shaper, internet usage monitoring and reports...
- Network diagram of bridge mode:
You need to choose a proper deployment according to your requirement.
2.3 License
- There is no client limit of free license.
- Some modules are not supported by free license.
- On first installation, you can choose "30-day free trial". There is no feature and client limit in the free trial.
- For features difference of "free license" and "enterprise license", please check: http://www.imfirewall.com/ros_freelicense.htm
- When trial expired, to continue the enterprise, you need to buy a key, or switch to the free license.
- You can activate and change license in "System"->"License".
3 Failure Recovery
You may use the console UI for failure recovery. For example, you may reset settings when:
- Forget admin's password.
- Web UI is blocked by firewall rules.
- Incorrect LAN interface settings.
You have following options to reset WFilter:
- Stop firewall rules.
- Reset admin password.
- Reset interface settings.
- Restore factory settings.