Revision as of 23:09, 18 August 2017

1 IP-MAC Binding

This module enables you to bind an ip address to a MAC address. Please notice:

When "ip-mac binding" is enabled, WFilter NGF DHCP server will assign static ip addresses to clients.
WFilter NGF does not act as a DHCP server when deployed as a network bridge.
If you have another dhcp server, for "ip-mac binding" to work properly, please modify your DHCP server to assign listed static ip addresses to clients.
If you want to apply binding to clients connected with a three layer switch, you need to enable "MAC Detector".

For unlisted IPs, you can choose to:
- "Block All". No internet access for unlisted IP addresses.
- "Allow All". Allow internet access for unlisted IP addresses.
- "Block below IP". Local IP address belongs to the IP ranges will be blocked.
For unlisted MAC addresses, you can set each lan subnet to assign IP address or not.
- "Disable". Do not assign IP to unlisted MAC address.
- "Enable". Assign IP to unlisted MAC address.

Please notice: even a binding is in "off" state, static ip address will still be assigned by WFilter's DHCP.

Scan and Import: scan local ip & mac list for importing.
- Without "MAC Detector", only local ARP table will be scanned.
- With "MAC Detector" enabled, it also can import clients detected by "MAC Detector".

@@ Line 3: / Line 3: @@
 This module enables you to bind an ip address to a MAC address. Please notice:
-* When "ip-mac binding" is enabled, WFilter NGF will assign static ip addresses to clients.
+* When "ip-mac binding" is enabled, WFilter NGF DHCP server will assign static ip addresses to clients.
 * WFilter NGF does not act as a DHCP server when deployed as a network bridge.
 * If you have another dhcp server,  for "ip-mac binding" to work properly, please modify your DHCP server to assign listed static ip addresses to clients.