Installation of WFilter ROS
From Wiki of WFilter NG Firewall
(Difference between revisions)
(→Using a DVD) |
(→Using a USB drive) |
||
Line 31: | Line 31: | ||
== Using a USB drive == | == Using a USB drive == | ||
+ | |||
+ | You can install WFilter ROS using a DVD or using a USB drive. When using a USB drive, please check below steps: | ||
+ | |||
* Download the ISO file from [http://www.wfilterros.com/download.htm]. | * Download the ISO file from [http://www.wfilterros.com/download.htm]. | ||
* Download and launch "Universal USB Installer". | * Download and launch "Universal USB Installer". | ||
Line 42: | Line 45: | ||
* Now boot your pc from the USB driver, you should see the installation menu in a few seconds. For detailed steps of installation, please check: [[#Installation Steps]] | * Now boot your pc from the USB driver, you should see the installation menu in a few seconds. For detailed steps of installation, please check: [[#Installation Steps]] | ||
− | |||
== Installation Steps == | == Installation Steps == |
Revision as of 10:43, 30 December 2015
Contents |
1 Hardware Requirements
Hardware requirements of WFilter ROS:
CPU | 2.5GHz |
RAM | 512M |
Disk | 1G |
Adapters | Two wired adapters |
Please notice: if you need enable internet usage recording, the required disk size is related to your clients number. Please check the "Calculate the requried RAM and disk space now" in the ROS homepage.
2 Using a DVD
You can install WFilter ROS using a DVD or using a USB drive. When using a DVD, please check below steps:
- Download the ISO file from [1].
- Burn the ISO into a CD/DVD disk.
- Boot your pc from the DVD driver, you should see the installation menu in a few seconds. For detailed steps of installation, please check: #Installation Steps
3 Using a USB drive
You can install WFilter ROS using a DVD or using a USB drive. When using a USB drive, please check below steps:
- Download the ISO file from [2].
- Download and launch "Universal USB Installer".
- Choose "Try Unlisted Linux ISO", browse and choose the downloaded ISO file and target USB driver.
- Click "Create" to burn the ISO file into the USB driver.
- Now boot your pc from the USB driver, you should see the installation menu in a few seconds. For detailed steps of installation, please check: #Installation Steps
4 Installation Steps
- The installation menu:
- Type "N" to install WFilter ROS into the first hard disk. The installation might take about 30 seconds.
- Installation success, eject the DVD or USB and reboot.
- The ROS system will initialize itself and boot into the console menu.
- Now you can access web UI from another pc via URL http://192.168.10.1.
- Please notice:
- Default username is "admin" with password "123456".
- The first adapter will be assigned with ip address "192.168.10.1", with DHCP service enabled.
- You need to set another pc to "obtain ip address automatically" or static ip "192.168.10.x" to open the "http://192.168.10.1" web UI.
- If you're not sure of the LAN interface, please type "1" in the console menu for details.