IP-MAC Binding

From Wiki of WFilter NG Firewall
Revision as of 16:09, 30 March 2017 by WFilter (Talk | contribs)

Jump to: navigation, search

Contents

1 IP-MAC Binding

This module enables you to bind an ip address to a MAC address. Please notice:

  • "IP-MAC Binding" is only available in "gateway" deployment mode.
  • If a listed client is configured as "obtain ip address automatically", it will always be assigned with the bound ip address by WFilter's DHCP service.
  • If there is another DHCP server existing in your network, please configure this DHCP server to assign listed static ip addresses to clients.
  • If you want to apply binding to clients connected with a three layer switch, you need to install "MAC Detector".


2 Settings

Ipbound04.png

  • For unlisted IPs, you can choose to:
    • "Block All". No internet access for unlisted IP addresses.
    • "Allow All". Allow internet access for unlisted IP addresses.
    • "Block below IP". Local IP address belongs to the IP ranges will be blocked.
  • For unlisted MAC addresses, you can set each lan subnet to assign IP address or not.
    • "Disable". Do not assign IP to unlisted MAC address.
    • "Enable". Assign IP to unlisted MAC address.
  • Clear DHCP lease. So clients will get a new IP address.

3 IP-MAC List

  • Click the "state" icon, you can turn on/off the binding.

Ipbound01.jpg

Please notice: even a binding is in "off" state, static ip address will still be assigned by WFilter's DHCP.

4 Scan and Remove

Ipbound02.jpg

  • Delete: delete ip-mac list

Ipbound03.jpg

Personal tools
Namespaces

Variants
Actions
Navigation
Tools